These assembly instructions are for:
WR600 56 Bottle Modular Wine Rack
WR602 48 Bottle Wine Rack with Flat Shelf
WR800 36 Bottle Modular Wine Rack
Thank you for purchasing one of our Modular Wine Racks. You will find the assembly of the Wine Rack is extremely simple and will take just a few minutes. You will need philips head screw driver or a philips head screwdriver bit for your electric drill.
(1) Remove the contents of the shipping box. There should be 4 predrilled uprights (legs), 7 (WR600 and WR602) 6 (WR800) shelves, screws and dowels.
Uprights (Legs)
The bottom end of the upright has the greatest distance between the end of the upright and the holes.
Dowels
Dowels are only used if one wine rack is being stacked on the top of another. There are two holes for the dowels in each end of the uprights.
(2) Place a shelf on edge on the floor. Take an upright and attach it to a corner of the shelf using 2 screws. The screws should go into the holes in the shelf.
(3) Attach the remaining shelves to the uprights.
You are now finished. Enjoy!
If you have any questions call us at 1-866-676-4028
